eGo 18650 T2 Mod - Black

The Joyetech eGo T2 mod is one of the newest eGo line products form Joyetech.

This unit uses a rechargeable 18650 battery (sold seperately) for outstanding battery life and long lasting performance.

 Joye eGo-T 2 Mod has a 5-click protection function.  Generally, the battery is shipped in the off position. In off position, the eGo-T will not function even when pressing the button. To turn on battery, press manual button 5 times within 2 seconds. You will see white LED flash. To turn off battery, press manual button 5 times within 2 second as well, the white LED will flash!  "5-click protection" can protect the battery from being activated when you do not want or do not use it. No more firing in your pocket! 


The biggest improvement of eGo-T 2 upgrade control unit: it has two modes to the switch. One is the constant voltage output mode which gives constant 3.3V(when it's driving the atomizer (load added) and is the same as the normal eGo-T battery. The other is variable voltage output mode, in this mode, the voltage will change from 4.15V to 3.6V as the lithium battery power decrease. With higher voltage up to 4.15V, this give you a better vapor feeling.

Meanwhile, it is easier to switch, check below:
Switching operation and features:
1. From constant voltage output mode to new battery voltage voltage output:
1.1 When the mode is 3.3v constant output mode, lock the battery by 5 clicks first(white LED blinks 3 times).
1.2 By pressing button for 5 seconds(not 5 clicks), LED will change to orange with 3 blinks. The battery has switched to variable voltage output mode(battery voltage output mode).
1.3 Then click the button for 5 times, then you can smoke in battery voltage output.
1.4 In new battery voltage output mode, the LED is orange.
1.5 When charging, orange LED will blink 5 times in this new mode. 

2. From new battery voltage output

to constant voltage output mode:

2.1 In new battery voltage output mode, lock the battery by 5 clicks first(orange LED blinks 3 times).
2.2 By pressing button for 5 seconds(not 5 clicks), LED will change to white with 3 blinks. And the mode has switched to 3.3V constant voltage output mode.
2.3 Then click the button for 5 times, then you can smoke in 3.3V constant voltage.
2.4 In 3.3V constant voltage, the battery features has no difference from present eGo-T battery.
2.5 When charging, white LED blinks 5 times in this new mode.

A great Mod for beginners. 

Customer Reviews