The Joye eGo passthrough battery is amazing! Usable as a normal passthrough, but it unplugs and becomes a fully usable eGo battery with 1000mAh of all day and more vape-on-the-go power! Good quality, good battery life, and a Genuine Joye! Get them while you can! Features 5 click button on/off protection.
Depending on stock you will receive either the eGo t-2 or ego C t2 version of this product. Both function the same and are the same device, the only difference being the led color changes in the c version as the battery drains.
The biggest improvement of eGo-T 2 upgrade control unit: it has two modes to the switch. One is the constant voltage output mode which gives constant 3.3V(when it's driving the atomizer (load added) and is the same as the normal eGo-T battery. The other is variable voltage output mode, in this mode, the voltage will change from 4.15V to 3.6V as the lithium battery power decrease. With higher voltage up to 4.15V, this give you a better vapor feeling.
Meanwhile, it is easier to switch, check below:
Switching operation and features:
1. From constant voltage output mode to new battery voltage voltage output:
1.1 When the mode is 3.3v constant output mode, lock the battery by 5 clicks first(white LED blinks 3 times).
1.2 By pressing button for 5 seconds(not 5 clicks), LED will change to orange with 3 blinks. The battery has switched to variable voltage output mode(battery voltage output mode).
1.3 Then click the button for 5 times, then you can smoke in battery voltage output.
1.4 In new battery voltage output mode, the LED is orange.
1.5 When charging, orange LED will blink 5 times in this new mode.
2. From new battery voltage output
to constant voltage output mode:
2.1 In new battery voltage output mode, lock the battery by 5 clicks first(orange LED blinks 3 times).
2.2 By pressing button for 5 seconds(not 5 clicks), LED will change to white with 3 blinks. And the mode has switched to 3.3V constant voltage output mode.
2.3 Then click the button for 5 times, then you can smoke in 3.3V constant voltage.
2.4 In 3.3V constant voltage, the battery features has no difference from present eGo-T battery.
2.5 When charging, white LED blinks 5 times in this new mode.
One (1) eGo Passthrough battery (Black color)
USB passthrough cable
Manufacturer: Joye Technologies
Battery: USB 1000mAh battery
By Purchasing this product, you are accepting full responsibility for it's use. You agree that in no way can iVape be held responsible for any misfortune caused by misuse of this item. Please use a powered USB hub for this item, iVape is not responsible for damages to computers. Before buying this item, you must affirm that you know the dangers of handling Li-ion batteries, and agree to take responsibility for this unit's use.
Warranty and Replacement info:
14 day replacement on defective parts or DOA. No Refunds. Physical damage is not covered by the return policy.
Mike - Friday, 26 August 2011
The only battery you'll need. This is the perfect mix a battery that will last you all day (and then some) and a passthrough. The size is a little on
the big side; but it's so pretty you won't care. Fits so well in the hand. I love the five click safety feature too.